Free shipping for orders over $125.00
Search
← E-Moto News

Brakes · 2026-11-03

Brake Bleeding & Maintenance

Keep hydraulic brakes feeling firm.

Right fluid

Use only the fluid type printed on your master cylinder. Mineral oil and DOT fluid do not mix.

Signs you need a bleed

A spongy lever or a lever that pulls to the bar.

Keep it clean

Brake fluid damages paint and pads; wipe spills right away.

Identify fluid before opening the system

Confirm the required fluid in the service documentation if markings are unclear. DOT fluid types and mineral-oil products are not universal substitutes. Use the correct bleed kit, clean tools and fresh specified fluid; contamination can damage seals and compromise braking.

Diagnose more than trapped air

A soft lever can indicate air, worn components, a leak or incorrect setup. Inspect hoses, fittings, calipers and the master cylinder before bleeding. Do not ride with a lever that reaches the bar or fluid leaking from the system. Bleeding alone will not repair damaged seals.

Protect friction surfaces

Remove or shield pads as directed and use a bleed block where required. Protect finishes and follow the fluid manufacturer’s cleanup instructions. Once finished, check for leaks and firm lever pressure, reinstall components correctly and test at low speed in a controlled area before normal riding.

Shop parts →

Survey · 10% Off