Yozma · 2026-11-02
Suspension Setup Baseline
A simple starting point for setting up suspension.
Sag first
Set preload so the bike sits correctly with you on it.
Rebound
Too fast feels bouncy; too slow feels harsh over repeated bumps.
One change at a time
Adjust in small steps and test ride between changes.
Measure instead of guessing
Measure suspension position fully extended and with the rider wearing normal gear, using the procedure recommended for your exact suspension. Rider sag targets differ by bike and discipline. If the correct sag cannot be achieved within the permitted preload range, spring selection may need attention.
Record a repeatable baseline
Write down current settings before making changes. Count adjustments gently from the reference position without forcing the adjuster. Test the same short route at a consistent pace, changing only one adjustment at a time so you can identify what improved or worsened.
Know when adjustment is not enough
Leaks, damaged bushings, binding or worn linkage bearings require maintenance. Rebound that is too slow can make suspension pack down across successive bumps; too fast can reduce control. Follow the suspension manual and seek professional setup help when the available adjustments cannot produce a stable ride.






